Siemens SINUMERIK 840D sl Function Manual page 215

5.2 Setting data
5.2.1 Channelspecific setting data
Number Identifier: $SC_
42465 SMOOTH_CONTUR_TOL
42466 SMOOTH_ORI_TOL
42470 CRIT_SPLINE_ANGLE
5.3 Signals
5.3.1 Signals from channel
DB number Byte.Bit
21, ... 36.3
5.3.2 Signals to axis/spindle
DB number Byte.Bit
31, ... 60.6
31, ... 60.7
Basic logic functions: Continuouspath Mode, Exact Stop, LookAhead (B1)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0
Description
All axes stationary
Description
Position reached with exact stop coarse
Position reached with exact stop fine
Description
Max. contour deviation on rounding
Max. deviation of the tool orientation on rounding
Limit angle for spline and polynomial interpolation and
compressor
Data lists
5.2 Setting data
63