Profile System Parameter Setup Area; Table 2-7 Profile System Parameter Setup Area (Description Example Of Lqe500); Table 2-8 Profile System Parameter Setup Area (Description Example Of Lqe502) - Hitachi S10mini User Manual

2.1.5 Profile system parameter setup area

The profile system parameters for the FL.NET module can be referenced with the setup tool named
FL.NET For Windows® (for details, see "5.4 Using the FL.NET Module").
For the FL.NET module, the profile system parameters for the vendor name, manufacturer model,
and protocol version are fixed data. The FL.NET module automatically changes the FA link status
and self-node status in accordance with the communication status and other conditions. The user
can merely perform node name setting with the setup tool.

Table 2-7 Profile System Parameter Setup Area (Description example of LQE500)

Item
Vendor name
Maker form
Node name (equipment name)
Protocol version
FA link status
Self-node status

Table 2-8 Profile System Parameter Setup Area (Description example of LQE502)

Item
Vendor name
Maker form
Node name (equipment name)
Protocol version
FA link status
Self-node status
Length Data
10 bytes "HITACHI"
10 bytes "LQE500"
⎯⎯⎯⎯
10 bytes
⎯⎯⎯⎯
1 byte
⎯⎯⎯⎯
1 byte
⎯⎯⎯⎯
1 byte
Length Data
10 bytes "HITACHI"
10 bytes "LQE502"
⎯⎯⎯⎯
10 bytes
⎯⎯⎯⎯
1 byte
⎯⎯⎯⎯
1 byte
⎯⎯⎯⎯
1 byte
2-7
2 FL.NET MODULE
Description
Vendor name
Maker form/device name
User-defined node name
Fixed at 0x80.
Entering/leaving, etc.
Node number duplication detection, etc.
Description
Vendor name
Maker form/device name
User-defined node name
Fixed at 0x80.
Entering/leaving, etc.
Node number duplication detection, etc.