Hitachi S10mini User Manual page 150

5 USER GUIDE
Message transmission service
number
Specified node number
Error code storage address
Common memory area 1 offset
size
Common memory area 2 offset
size
(*) For the relationship between real address on LPU (memory address) and symbol
name such as XW000, see "Table 2-5 Virtual Address Spare and Symbol Names."
"Memory address" in table is the address to be specified.
[Return code] (for C mode handler only)
0 (0x00000000): Normal termination
-1 (0xFFFFFFFF): Parameter abnormality exists or the handler is busy processing another
-2 (0xFFFFFFFE): When mounting S10V, specifies real address (0x01000000 to 0xFFFFFFFE)
Parameter
message. Error code is stored in area which specified error code storage
address. For content and measure of error code, see "Table 7-7 List of
Detectable Codes."
on CMU at error code storage address. Please review the specified
address.
Input range
19 (only when a mathematical/logical function is
used)
1 to 254
Specify a real address (even-numbered address)
on the CPU or LPU. (*)
0 to 0x1FF (variable in 1-word units)
0 to 0x1FFF (variable in 1-word units)
5-98