Table 8-18 Details Of Common Parameters - Hitachi S10mini User Manual

8.9.2 Details of common parameters
Table 8-18 shows the details of common parameters.
Parameter name
Device profile common
specification version
System parameter
identification string
System parameter
revision number
System parameter
revision date
Device category
Vendor name
Product model
Note: The contents of the device category parameter are indicated below:
"PC" or "PLC" .......... Programmable controller
"NC" or "CNC" ........ Computer numerical control device
"RC" or "ROBOT" ... Robot controller
"COMPUTER" ......... Personal computer, panel computer, workstation, display, or other
"SP_＊‥＊"............. To be specified by the vendor
"OTHER".................. Other
As a syntactical rule for transfer, the entire system parameter set or common parameter set, the
system parameter revision date, or the entire device-specific parameter set (optional) must be of a
SEQUENCE structure type (device-specific parameter inner structuring is optional).

Table 8-18 Details of Common Parameters

Name character string
[PrintableString type]
(Length), (String)
6, "COMVER"
2, "ID"
3, "REV"
7, "REVDATE"
10, "DVCATEGORY"
6, "VENDOR"
7, "DVMODEL"
computer
(＊‥＊: single-byte alphanumeric characters)
Data type
[type]
INTEGER
PrintableString
INTEGER
[INTEGER], 2, (0001-9999),
[INTEGER], 1, (01-12),
[INTEGER], 1, (01-31)
PrintableString
PrintableString
PrintableString
8-75
8 APPENDIXES
Contents of
parameter
(Length), (Contents)
Example: 1, 1
7, "SYSPARA"
Example: 1, 0
Example: 2, 1998
1, 9
1, 30
Example: 3, "PLC"
(see Note)
Example: 4, "MSTC"
Example: 3, "JOP"