Hitachi S10mini User Manual page 101

The table below shows the acceptable input ranges for various input items.
Input item
Node number
(PCs allocation)
FA link status
(PCs allocation)
Self-node status
(PCs allocation)
Note 1: The register/extension memory address range applicable to the self-node status area and
FA link status area is the same as for the CPU or LPU memory allocation area.
Note 2: The self-node status/FA link status area setting must not be a duplicate of the CPU or
LPU memory allocation area setting for any of the other participating nodes or the self-
node.
When the self-node status area is set up, the self-node status flag is
transferred as 1-word data.
When the FA link status area is set up, the FA link status flag for the self-node
is transferred to the low-order byte of the specified area.
If the area for self-node status or FA link status information is not specified,
the FL.NET module cannot transfer the status information to the S10mini or
S10V.
Description
Specify the area to which the self-node
number is to be transferred (the area size
is 1 word).
Specify the area to which the FA link
status of the self-node is to be transferred
(the area size is 1 word).
Specify the area to which the self-node
status is to be transferred (the area size is
1 word).
See Table 5-7, "Address Ranges for
Common Memory Area Allocation in CPU
or LPU Memory."
See Table 5-7, "Address Ranges for
Common Memory Area Allocation in CPU
or LPU Memory."
See Table 5-7, "Address Ranges for
Common Memory Area Allocation in CPU
or LPU Memory."
5-49
5 USER GUIDE
Acceptable input range