Hitachi S10mini User Manual page 222

Error
Description
code
0xFE08 ACK reception
sequence number error
0xFE09 ACK reception
sequence number
version error
0xFE12 Message queue full
0xFE13 Initialization error
0xFE16 Message size error
0xF0XX Driver abnormal
or
0xFFXX
Table 7-7 List of Detectable Codes
Cause
An ACK response returned from a
specified node number reported a
sequence number error.
An ACK response returned from a
specified node number reported a
sequence number version error.
The message queue for a specified
node number is full. The
specified node number cannot
receive a request.
Message processing initialization
is not completed for a specified
node number.
A specified node number reported
that an abnormal message size was
requested by the self-node.
An abnormality was detected by a
driver when a user-requested
message was transmitted.
7-13
7 TROUBLESHOOTING
Remedy
It is conceivable that the module may
be defective. Replace the module.
Reissue the request after a while or
decrease the number of requests to the
specified node number.
Reissue the request after a while.
It is conceivable that the module may
be defective. Replace the module.
(2/2)