Ambient Conditions; Used Standards; Fig. 4-4: Ambient Conditions; Fig. 4-5: Used Standards - Bosch Rexroth VSB 40.1 Project Planning Manual

VSB 40.1
4.4

Ambient Conditions

Max. ambient temperature (surrounding air
temperature)
Exception: 230 V – UPS (see chapter 8.3)
Max. temperature gradient
Relative humidity
Air pressure
Mechanical strength
4.5

Used Standards

EN Standards
CE Marking
DOK-SUPPL*-VSB*40.1***-PR01-EN-P
In operation
+5 °C... +45 °C
+0 °C... +40 °C
Temporal temperature changes
up to 3 °C per minute
Climatic class 3K3 according to
EN 60721, condensation not
permissible.
Up to 2,000 m above MSL
according to DIN 60204
Max. vibration:
Frequency range: 10...150 Hz
Excursion
:
Acceleration
: 0.25 g
According to EN 60068-2-6
Fig. 4-4: Ambient conditions
The system components of the industrial PCs correspond to the following
standards:
Standard
EN 60 204-1
EN 50 081-2
EN 50 082-2
EN 60 742
EN 60 950
EN 61 131
EN 61 131-2
EN 418
EN 60 529
EN 60 068-2-6
EN 60 068-2-27
Fig. 4-5: Used standards
Note: Concerning delivered VSB 40.1 devices all CE requirements
are fulfilled. After plugging-in extension cards, however, a new
CE test has to be executed.
Storage/Transport
-20 °C to +60 °C
+0 °C to +40 °C
Not defined
Climatic class 3K3 according to
EN 60721, condensation not
permissible.
Max. shock:
5 g according to
DIN IEC 68-2-27,
0.025 mm
no disturbance of the function
for 10 ... 57 Hz
for 57 ... 150 Hz
Meaning
Electrical equipment of machines
Basic technical standard, emitted interference
(industrial environment)
Basic technical standard, noise immunity (industrial
environment)
Transformer for 24 V power supply unit, protective
separation
Overvoltage category II
Requirements concerning the 24 V outputs
Requirements concerning the 24 power supply
Machine safety, EMERGENCY STOP devices
Degrees of protection (incl. housings and installation
compartments)
Vibration test
Shock test
4-3
Technical Data