Ups Software; Fig. 9-1: Icon Of The Ups Software In The Task Bar - Bosch Rexroth VSB 40.1 Project Planning Manual

VSB 40.1
9

UPS Software

DOK-SUPPL*-VSB*40.1***-PR01-EN-P
The software required for the optionally available UPS (see chapter 8.3
"Connection of the Uninterruptible Power Supply" on page 8-2 and section
chapter "Uninterruptible Power Supply" on page 10-2) is stored on the
hard disk of the VSB 40.1. Before being able to use this software, you
have to install it. Start the installation of this UPS software with the
corresponding *.cmd
C:\Support\UPS\Bicker\BRCSetup.cmd.
To install software you must have administrator rights.
If after selecting the desired language you confirm during the further
installation process the requests with "OK", "Ja" or "Yes", the UPS
software named "UPSMON for Windows"
"C:\Programme\UPSMON" or "C:\ProgrammFiles\UPSMON" and then
started with the standard settings.
After the installation of the software, the following icon appears on the
task bar:
Fig. 9-1: Icon of the UPS software in the task bar
Via the right mouse button you can call up the two programs UpSetup and
UpsView. You can also start the two programs via "Start -> Programs ->
UPSMON". In program group UPSMON you will also find help files, which
provide information on possible settings or changes in the system
configuration.
file. At present,
is installed
9-1
UPS Software
it is file
in folder
upsmon.bmp