Dimensions And Installation Notes; Fig. 5-1: Vsb 40.1 As Variant Nn; Fig. 5-2: Vsb 40.1 As Variant Ls (Drive In Connector Direction) - Bosch Rexroth VSB 40.1 Project Planning Manual

VSB 40.1
5

Dimensions and Installation Notes

DOK-SUPPL*-VSB*40.1***-PR01-EN-P
To meet the various installation requirements, the VSB 40.1 equipped
with an optional drive is available as different variants. Depending on the
provided clearance for the opening drive, select the VSB 40.1 as
variant NN (see Fig. 5-1) or as variant LS (see Fig. 5-2) with the drive in
connector direction (position 12 of type code on page 10-1).
For safe mounting of the VSB 40.1 in variant NN, e. g. in a control cabinet
two times four fastening holes are provided at the integrated mounting
brackets, so that the VSB 40.1 can be horizontally or vertically mounted.
The VSB 40.1 as variant LS with drive in connector direction has four
mounting holes.
Fig. 5-1: VSB 40.1 as variant NN
Fig. 5-2: VSB 40.1 as variant LS (drive in connector direction)
Each horizontal and vertical mounting direction is permissible. However,
Bosch Rexroth recommends the mounting directions illustrated below.
For all mounting positions observe the required clearance for connectors
and cables as well as for the opened drive. To ensure sufficient cooling of
the VSB 40.1, provide a minimum clearance of 50 mm.
Dimensions and Installation Notes
Foto_Anschluesse_vorne_k.jpg
Foto_Anschluesse_LS_k1.jpg
5-1