Extension Cards; Insert An Extension Card; Fig. 8-11: Loosen The Fastening Screws Of The Cover - Bosch Rexroth VSB 40.1 Project Planning Manual

VSB 40.1
8.5

Extension Cards

Insert an Extension Card

DOK-SUPPL*-VSB*40.1***-PR01-EN-P
To place extensions cards slots for PCI bus are available.
Risk of damage to the operator terminal or the
extension cards by electrostatic discharges!
Comply with all ESD-protection measures during
⇒
working with modules and components! Avoid
CAUTION!
electrostatic discharges!
Risk of damage to the operator terminal or
corruption of application software by
integrating not-released extension cards!
⇒ Install only released extension cards, and have them
CAUTION!
installed by skilled employees.
1. Shutdown the operating system.
2. Wait until the power supply unit switches off automatically and then,
switch off the supply voltage. If required, unplug all connectors from
the VSB 40.1.
3. Put the VSB 40.1 on a solid mat, so that the connector panel looks in
your direction.
4. Loosen and remove the two fastening screws of the cover:
Fig. 8-11: Loosen the fastening screws of the cover
Maintenance and Installation
84_Deckel.JPG
8-9