Siemens M20 Terminal Technical Description page 75

Siemens Information and Communication Products
AT^SPBS Steps the selected phonebook alphabetically
Test command Response
AT^SPBS=?
^SPBS: (list of supported <value>s)
OK
Parameter
see execute command
Execute command Parameter
AT^SPBS= <va- <value>
lue>
Response
if <n>=1
TA steps down one entry.
^SPBA: <index2>,<number>,<type>,<text> <CR,LF>
^SPBA: <index3>,<number>,<type>,<text> <CR,LF>
^SPBA: <index4>,<number>,<type>,<text> <CR,LF>,<CR,LF>
OK
if <value>=2 (after <value>=1)
TA steps up one entry.
^SPBA: <index1>,<number>,<type>,<text> <CR,LF>
^SPBA: <index2>,<number>,<type>,<text> <CR,LF>
^SPBA: <index3>,<number>,<type>,<text> <CR,LF>,<CR,LF>
OK
If error is related to ME functionality:
+CME ERROR: <err>
The parameters in the response are explained in the specification of the
nebook alphabetically"
Reference Note
This command can be used for the ME, SM, MT, ON and FD phonebook.
If the command AT^SPBA=<browsetext> has not been used before using the STEP command
AT^SPBS the output starts at the first alphabetical entry.
For examples refer to
Steps the selected phonebook alphabetically Command" on page 168
Version 8 dated 15.03.00
1 to make a step downward in the alphabetically sorted phonebook
2 to make a step upward in the alphabetically sorted phonebook
command.
8.2.7.6 "Using the AT^SPBA Browse the phonebook alphabetically and AT^SPBS
AT command interface
"AT^SPBA Browse the pho-
.
A
75