Kenwood NX-5000 Series Common Function Reference page 74

3 BASIC OPERATIONS
3.5 Changing the Zone-channel
Operating the transceiver
1
Press the Channel Entry
NXDN Trunking system zone.
The transceiver enters Channel Entry Mode.
The following operations are identical even if the transceiver enters
Channel Entry Mode by using the keypad.
2
Enter the channel number.
The following are examples for entering a channel number by using the keypad.
0
If the maximum channel number has 3 digits:
To make a call on channel 250, press the [2], [5] and [0] keys in this order.
To make a call on channel 90, press the [0], [9] and [0] keys in this order.
To make a call on channel 7, press the [0], [0] and [7] keys in this order.
0
If the maximum channel number has 2 digits:
To make a call on channel 90, press the [9] and [0] keys in this order.
To make a call on channel 7, press the [0] and [7] keys in this order.
0 If the maximum channel number has 1 digit:
To make a call on channel 7, press the [7] key.
If the maximum number of digits is entered, the transceiver exits Channel Entry Mode and then migrates to the
channel of the entered channel number.
3
Press the Menu ([
The transceiver exits Channel Entry Mode and then migrates to the channel of the entered number.
If there is no channel of the entered channel number, a Key-entry Error Tone (1 beep) sounds from the transceiver,
and then the transceiver exits Channel Entry Mode.
Note
Refer to "KEY OPERATIONS FOR EACH
0
Mode.
The channel number selected before the transceiver enters Channel Entry Mode appears on the display, such as "[001]".
0
Pressing the Menu ([Q]) or [*] key while no channel number is entered causes the transceiver to exit Channel Entry Mode
and then to return to this channel number.
0 If the transceiver exits Channel Entry Mode by pressing the Home ([T]) key, the transceiver returns to the channel
selected before the transceiver entered Channel Entry Mode.
Pressing the PTT switch while in Channel Entry Mode causes the transceiver to transmit on the channel selected before
0
the transceiver entered Channel Entry Mode.
If the channel is changed while in Channel Entry Mode, pressing the PTT switch initiates transmission on the channel to
0
which the transceiver has changed.
If no key is pressed before the amount of time configured in Mode Reset Timer elapses, the transceiver exits Channel
0
Entry Mode and then returns to the channel selected before the transceiver entered Channel Entry Mode.
Configuration using KPG-D1/ D1N
Assigning functions to the PF keys on the transceiver (
Common FUNC (K, F)/Ver 2.20
key, or press the Group ID/Channel Entry
]) key.
MODE" for key operations for entering the channel number in Channel Entry
key after selecting a zone other than an
Transceiver Settings > Key Assignment)
CONTENTS
12 : 34
A
M
C h a n n e l E n t r y L o w T X P o w e r 1
[ 001]
Channel No. ___
O K
43
INDEX