Kenwood NX-5000 Series Common Function Reference page 219

10 BLUETOOTH COMMUNICATION
10.3 Registering and Connecting a Bluetooth-compatible Device to the Transceiver (Pairing/ HSP Connection)
If the Passkeys do not match:
Pairing cannot occur with this Bluetooth-compatible device. Pressing the Home ([T]) key ends pairing.
Note
If the Passkeys do not match, pairing ends even if the Menu ([Q]) or [*] key is pressed.
3
Complete pairing.
When pairing completes, the Bluetooth-compatible device is registered in the transceiver, and the connection
process starts by HSP Connection.
A Ring Tone sounds from the Bluetooth-compatible device during the connection process. In this case, start-up
operations need to be done on the Bluetooth-compatible device. Refer to the instruction manual supplied with the
Bluetooth-compatible device for details on the start-up operations.
The mic and speaker of the Bluetooth-compatible device can be used when the connection process completes. In
this case, a Bluetooth Connect Tone (2 beeps) sounds from the transceiver, the "
appears for 1 sec. Also, the LED turns Off.
Note
The connection process continues even if a Voice Call or Data Call is received during the connection process.
0
Mode Reset Timer is extended during the connection process.
0
Configuration using KPG-D1/ D1N
0
Configuring Define Bluetooth Device (
Bluetooth > Bluetooth > Define Bluetooth Device)
0
Configuring Fixed PIN (
Bluetooth > Define Bluetooth Device)
Common FUNC (K, F)/Ver 2.20
Z o n e 1
C h a n n e l 1
C o n n e c t i n g
Me nu Z on e+
Z o n e 1
C h a n n e l 1
C o n n e c t e d
Me nu Z on e+
Transceiver Settings > Optional Features > Optional Features 2 > GPS/
Transceiver Settings > Optional Features > Optional Features 2 > GPS/Bluetooth >
12 : 34 A
M
" icon blinks, and "Connected"
12 : 34 A
M
CONTENTS
188
INDEX