Kenwood NX-5000 Series Common Function Reference page 411

17 STRUCTURING A MULTI RF DECK/ MULTI CONTROL HEAD
17.11 About Configuration Using KPG-D1/ D1N
5
Configure FPU Data Select
From RF Deck Data A to RF Deck Data C configured in step 3, the configuration data of which RF Deck is to be
written is configured for each RF Deck.
Clicking the "OK" button displays Write Data to the Transceiver.
6
Click the "Write" button.
The writing of configuration data starts.
When the writing of configuration data completes, a writing complete message box appears. Click the "OK" button.
Common FUNC (K, F)/Ver 2.20
and click the "OK" button.
Figure 17-77 RF Deck Selection
Figure 17-78 Write Data to the Transceiver
CONTENTS INDEX
380