Kenwood NX-5000 Series Common Function Reference page 192

9 STORING RECORDED AUDIO/ GPS DATA
9.2 Recording Received Audio Automatically (Auto Recording)
0
Starting Auto Recording
If Auto Recording starts recording the received or transmitted audio at the timing configured in Recording Type, the "R"
icon blinks.
The recording start date and time is stored. Also, if "Individual Call" is configured in Recording Type, the ID information
of the transmitting transceiver is stored.
When the amount of time configured in Maximum Recording Length elapses, the "R" icon disappears and the recording
ends.
0
If Auto Recording does not start because the maximum number of recordings has been reached
"Memory Full" appears on the display for 1 sec. After that, "Memory Full" appears on the display for 1 sec at 10-sec
intervals.
If the audio is recorded to the internal memory, Auto Recording does not start if First-in First-out Deletion is disabled,
and if the maximum number of recordings has already been reached. Also, if the audio is recorded to a microSD card, Auto
Recording does not start if the conditions for storing data in the microSD card are not satisfied. (Refer to
enables audio data file and GPS data file to be stored in a microSD
Common FUNC (K, F)/Ver 2.20
12 : 34 A
M
I n d i v i d u a l
T R U C K 8 2 4
Me nu Z on e+
12 : 34 A
M
I n d i v i d u a l
T R U C K 8 2 4
Me nu Z on e+
12 : 34 A
M
I n d i v i d u a l
T R U C K 8 2 4
M e m o r y F u l l
Me nu Z on e+
card.)
Conditions that
CONTENTS INDEX
161