Kenwood NX-5000 Series Common Function Reference page 442

19 CONFIGURATION FOR EACH FUNCTION
19.1 Available Functions for the PF Keys
Mobile:
0 [G]/ [H] key
0 [E]/ [F] key
Menu ([Q]) key
0
0 Back ([O]) key
0 Function ([W]) key
Home ([T]) key
0
Microphone Keypad
0
PTT switch
0
To directly enter a Unit ID or status in FleetSync, MDC-1200, an NXDN system, a P25 system, or a DMR system, Manual
0
Dialing needs to be enabled using KPG-D1/ D1N. (Refer to
The following functions are the common keys between Primary and Secondary. If one of the following functions is
0
configured in Primary, the same function is automatically configured in Secondary.
Channel Down
Channel Down (Continuous)
Channel Up
Channel Up (Continuous)
Direct Channel 1 to Direct Channel 5
Direct Channel 1 Select to Direct Channel 5 Select
Emergency
Function
Home Channel
Home Channel Select
Key Lock
Scan
Scan Normal
Zone Down
Zone Down (Continuous)
Zone Up
Zone Up (Continuous)
Configuration using KPG-D1/ D1N
Assigning functions to the PF keys on the transceiver (
Common FUNC (K, F)/Ver 2.20
Manual Dialing.)
Transceiver Settings > Key Assignment)
CONTENTS
411
INDEX