How Can I Synchronize Device Parameters - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Figure 8-23 Exporting information to PC
Figure 8-24 Exporting information to USB flash drive
----End

8.1.21 How Can I Synchronize Device Parameters?

Context




Procedure
Step 1 Log in to the ECC800 WebUI as the administrator.
Step 2 Choose Maintenance > Parameter Sync.
Step 3 Select a value from the Device type drop-down list box.
Step 4 Specify source device and target device, click Submit.
If communication between the ECC800 and the device is interrupted during parameter
synchronization, the synchronization fails. Ensure that the ECC800 and the device
communicate properly and synchronize parameters again.
Issue 05 (2019-09-16)
Do not delete the source devices before replacing devices.
After replacing devices, you can choose to synchronize configured device parameters to
the target devices.
Source Device: device before replacement
Target Device: device after replacement
Copyright © Huawei Technologies Co., Ltd.
8 FAQ
235