Huawei ECC800 User Manual page 171

ECC800 Data Center Controller
User Manual
Figure 6-51 Page for setting management attributes
Step 11 Click
Channel Management.
Step 12 Click Modify after selecting the IP address of the ECC800 connected to the NMS.


Issue 05 (2019-09-16)
IP Address indicates the ECC800 login IP address. Port indicates the ECC800 COM2 port (3212).
Device Address indicates the Polymer T/H sensor address.
to save the created device view. Choose System> Configuration > Transmission
If Connection mode is set to Compatible, click Confirm.
On the ECC800 WebUI, Enable Security Authentication is set to Disable.
If Connection mode is set to Security protocol, enter the value of Confirm password
that has been set on the ECC800 WebUI, and click Confirm.
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
161