Siemens HiPath 3000 Series Service Documentation page 571

Nur für den internen Gebrauch
REALS
●
Insert the REALS board into the slot marked 3 in the lower part of the shelf in the basic
cabinet and apply pressure until you hear a click.
Figure 4-21
The slots for the power supply units and for the REALS board must be covered with an
outer panel before the system is started up. The outer panel is fixed onto the shelf with
screws (see Figure 4-19).
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
HiPath 3800 - Installing the REALS Board
inst_h3.fm
Installing HiPath 3000
Installing HiPath 3800
4-39