Starting Hipath 5000; Preparing For Installation - Siemens HiPath 3000 Series Service Documentation

start_h5.fm
Startup and Administration HiPath 5000

Starting HiPath 5000

6.6 Starting HiPath 5000
6.6.1

Preparing for Installation

To ensure successful installation, you should check the points listed in the table below before
installing the HiPath 5000 software.
Table 6-4 HiPath 5000 - Preparing for Installation
Component
Hard disk parti- The server PC hard disk should be divided into two NTFS partitions. The
tioning main partition C should have a capacity of at least 4 GB and should be re-
served for the operating system and the HiPath 5000 software.
For safety reasons, partitioning with the format FAT 16/32 is not permitted.
Hardware Make sure that no unnecessary hardware is connected to the server PC;
any sound cards should be removed.
Access privileg- To install HiPath 5000, you must log on to the operating system with admin-
es istrator rights or, if necessary, log on as the server domain administrator.
LAN integration Check to ensure that the server PC has been correctly integrated in the cus-
tomer LAN (see Section 6.6.2).
Miscellaneous All applications running in the background must be closed prior to software
installation.
6-16
Nur für den internen Gebrauch
Description
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation