Modifying Hipath 5000 Components (Retro-Fitting, Updating, Deleting) - Siemens HiPath 3000 Series Service Documentation

start_h5.fm
Startup and Administration HiPath 5000

Modifying HiPath 5000 Components (Retro-Fitting, Updating, Deleting)

6.7 Modifying HiPath 5000 Components (Retro-Fitting, Updating,
Deleting)
The Setup maintenance program can be used for
retro-fitting additional components (features) to the current HiPath 5000 installation.
●
updating components (features) in the current HiPath 5000 installation,
●
Note: When upgrading from one version to another (from V8 to V9, for example), all com-
ponents (features) must first be uninstalled. The components from the new version can
then be installed (for more information, refer to Section 6.7.1).
deleting all components (features) of the current HiPath 5000 installation.
●
When activated, the Setup creates the relevant selection lists based on the current HiPath 5000
installation.
The WinAccount software for evaluating call data records is no longer used in HiPath
>
3000/5000 V4.0 or later.
Call data records must be evaluated with WinAccount before starting an update be-
cause updating uninstalls the WinAccount application.
Refer to the WinAccount user manual for information about the procedure
Before starting the Setup maintenance program, note the following information:
7
The TAPI Service Provider configuration (configuration and lines - see TAPI 170
●
Service Provider Help) and the CDB files for all connected systems (refer to Hi-
Path 3000/5000 Manager E Help) should be saved for security reasons.
The HiPath 5000 server must be stopped (Start/Programs/HiPath/Hi-
●
Path 5000 State Viewer, Stop Server button).
6-34
Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation