Commissioning Of Listed Motor And Encoder Via Smc - Siemens SINUMERIK 840D sl Commissioning Manual

8.5.2.1

Commissioning of listed motor and encoder via SMC

Introduction
In our example a power section is to be configured with a listed motor and encoder. You
have selected the menu "Commissioning > Drive systems > Drives". You are in the following
menu:
Figure 8-27
IBN CNC: NCK, PLC, drive
Commissioning Manual, 07/2007, 6FC5397-2AP10-3BA0
Menu "Drives > Configuration"
Commissioning SINAMICS drives
8.5 Commissioning using a drive wizard
81