Panasonic LP-400 Series External Control Manual page 89

⿎ Rank condition : RKC
Sets input conditions of "Rank Function" to switch characters using I/O input.
• Setting / Readout data of rank condition
Sub
STX RKC
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.
• Readout request of rank condition
STX RKC R
Name Data length [byte]
Parallel input
⿎ Rank character string : RKS
Sets character string used for "Rank Function" to switch characters using I/O input.
• Setting / Readout data of rank character string
Sub
STX RKS
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.
• Readout request of rank character string
STX RKS R
Name Data length [byte]
Data No.
Marking
character Max. 18
string
[Parallel input]
1-byte
(Check sum) Delimiter
Description
"1": 4-bit × 4
1
"2": 8-bit × 2
[Data No.] [Marking character string]
Max. 21-byte
[Data No.]
3-byte
Parallel input
8-bit x 2 (D15-8)
8-bit x 2 (D7-0)
3
4-bit x 4 (D15-12)
4-bit x 4 (D11-8)
4-bit x 4 (D7-4)
4-bit x 4 (D3-0)
Use the shift-JIS code.
(Up to 9 characters)
(Check sum) Delimiter
(Check sum) Delimiter
Description
Setting range
"256"–"511"
"000"–"255"
"048"–"063"
"032"–"047"
"016"–"031"
"000"–"015"
ME-LP400V-EX-6
Remarks
(Check sum) Delimiter
Remarks
The number in which the character
string is set is indicated.
The setting range varies
depending on the condition of
parallel input.
The character string to be marked
with the specified data No. is set.
Specify 0-byte of data length to
delete the character string in the
data No.
89