Panasonic LP-400 Series External Control Manual page 116

3. For arc (Data length: Max. 60-byte)
Data length
Name
[byte]
Processing
condition No.
Processing
element No.
Element type
X coordinate of
start point
Y coordinate of
start point
X coordinate of
end point
Y coordinate of
end point
Radius
Direction
Open angle
Dashed line:
Length of solid
part
Dashed line:
Length of blank
part
For deletion of the processing element, set the element type to straight line, and set X and Y coordinates of both start and
end points to "0".
* For the detail of the model type, refer to "Target laser marker" (P.8).
116
Description
1 "0"–"7"
3 "000"–"031"
1 "2": arc
8
Model type*
8
LP-V10
LP-4x0
LP-4x5/LP-V15
8
LP-4x1/LP-W
8
7 "000.010"–"300.000" [mm]
"0": CCW
1
"1": CW
"0": 180° under
1
"1": 180° more
Model type*
LP-V10
LP-4x0
(7)
LP-4x5/LP-V15
LP-4x1/LP-W
Model type*
LP-V10
(7) LP-4x0
LP-4x5/LP-V15
LP-4x1/LP-W
Setting range [mm]
"-045.000"–"+045.000"
"-055.000"–"+055.000"
"-080.000"–"+080.000"
"-027.500"–"+027.500"
Setting range [mm]
"000.010"–"090.000"
"000.010"–"110.000"
"000.010"–"160.000"
"000.010"–"055.000"
Setting range [mm]
"000.000"–"090.000"
"000.000"–"110.000"
"000.000"–"160.000"
"000.000"–"055.000"
ME-LP400V-EX-6
Remarks
To make it not dashed line (solid line),
input nothing.
To make it not dashed line (solid line),
input nothing.