I/O Interface Specification - Panasonic LP-400 Series External Control Manual

2-1 I/O Interface Specification

The I/O terminal block and the I/O connector are available as the external control I/O interface of this product.
• I/O terminal block: Loaded with the basic input/output to control the laser marker.
• I/O connector: Loaded with the input/output for data configuration such as selecting a file number and the input/output
for the specific functions.
Reference
• Before using I/O, configure the DIP switch and the environment settings. Refer to "1-3 Before External Control" (P.18).
• I/O terminal block is removable from the controller at the wiring.
Laser marker side
I/O connector (female)
A12
A11
B12
B11
A2
B2
A1
B1
I/O terminal block
Rear of controller
LP-400 series
When terminal block is detached
1
2
12
13
Laser marker side
D-sub 25 pin connector (female)
ME-LP400V-EX-6
LP-V/LP-W series
14
15
24
25
25