Panasonic LP-400 Series External Control Manual page 106

Name
Laser power
correction
Scan speed
correction
(Laser pulse cycle
correction)
(Only for LP-V
series)
*1 : In case of selecting ["46": EAN/UPC CC-A] or ["56": EAN/UPC CC-B] of bar code type, a bar code is automatically
generated according to the input characters in bar code data (1D side).
Input characters
Input 12 digit excepting a check digit.
Input 7 digit excepting a check digit.
Input 11 digit excepting a check digit.
Input 6 digit excepting a check digit.
*2 : The number of column of bar code is limited according to bar code's type.
Bar code type
UPC-E
GS1 DataBar Stacked
GS1 DataBar Stacked Omnidirectional
EAN/JAN-8
GS1 DataBar Limited
EAN-13/JAN-13
UPC-A
UCC/EAN128
GS1 DataBar
GS1 DataBar Truncated
GS1 DataBar Expanded
GS1 DataBar Expanded Stacked
106
Data length
[byte]
3 "000"–"200" [%]
3 "005"–"500" [%]
(3) "050"–"200" [%]
Bar code type
EAN/JAN-13
EAN/JAN-8
UPC-A
UPC-E
The number of column
available for CC-A code
5, 6, 7, 8, 9, 10, 12 [column]
4, 5, 6, 7, 8 [column]
3, 4, 5, 6, 7 [column]
Description
The number of column available for
CC-B code
8, 11, 14, 17, 20, 23, 26 [column]
6, 8, 10, 12, 15, 20, 26, 32, 38, 44
[column]
4, 6, 8, 10, 12, 15, 20, 26, 32, 38, 44
[column]
ME-LP400V-EX-6
Remarks
• The correction ratio is
calculated using the value set
at the laser setting as 100%.
• With LP-400/LP-W series,
nothing should be input in
Laser Pulse Cycle Correction.