Panasonic LP-400 Series External Control Manual page 134

⿎ Delay : DLY
Sets the delay time and distance from trigger input to marking startup.
• Setting / Readout data of delay
Sub
STX DLY
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.
• Readout request of delay
STX DLY R
Data
Name length
[byte]
Delay time/
distance
⿎ Marking interval : INT
Sets the marking interval (distance) in "Equidistant Marking" setting for flying object marking.
• Setting / Readout data of marking interval
Sub
STX INT
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.
• Readout request of marking interval
STX INT R
Data
Name length
[byte]
Marking interval
134
[Delay time/distance]
6-byte
(Check sum) Delimiter
Description
• Delay Time: "000000"–"005000" [ms]
6
• Delay Distance: "000.00"–"500.00" [mm]
[Marking interval]
6-byte
(Check sum) Delimiter
Description
6 "0000.0"–"3000.0" [mm]
(Check
sum)
(Check
Delimiter
sum)
Available only when the moving direction is other than
"still" and trigger type is "equidistant".
ME-LP400V-EX-6
Delimiter
Remarks
• When the moving speed is "still",
delay time is shown and the marking
start time after the trigger input is
displayed.
• When the moving speed is other than
"still", delay distance is shown and
the distance where the marking starts
after the trigger input is displayed.
Remarks