Panasonic LP-400 Series External Control Manual page 80

⿎ Status request: STS
Requires the operation status of laser marker, such as ready status and error occurrence status.
• Status request
STX STS R
• Response to status request
Read out with the following format:
STX STS A
Data
Name length
[byte]
Error occurrence
status
Laser pumping
status
Command
reception status
Marking ready
status
Trigger status
Reference
• Marking is enable when the response data is either "02110" or "02111".
80
(Check sum) Delimiter
[Error occurrence status] [Laser pumping status]
[Command reception status] [Marking ready status]
[Trigger status]
5-byte
Description
"0": no error
1
"1": error occurrence
"0": laser pumping OFF
1 "1": laser pumping
"2": laser pumping completed
"0": Shutter close or command
reception mode ON
(including while the shutter is
1 opened)
"1": Shutter open
(excepting when the command
reception mode is ON)
"0": marking disable (ready OFF)
1
"1": marking enable (ready ON)
"0": trigger OFF
1
"1": Trigger ON
Shutter and command reception mode (MKM
command) status is indicated.
Use this for determination of whether various
commands can be transmitted. For details,
refer to "Command Reception Condition".
The status of marking trigger acceptability is
indicated.
The status of trigger input (TRIG.IN) is
indicated when "equidistant marking" is
selected at trigger condition.
ME-LP400V-EX-6
(Check sum) Delimiter
Remarks