Panasonic LP-400 Series External Control Manual page 127

⿎ Step & repeat fine adjustment : SRA
Sets the fine adjustment of "Step & Repeat" to mark the same marking contents on multiple locations in one file.
• Setting / Readout data of step & repeat fine adjustment
Sub
STX SRA
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.
• Readout request of step & repeat fine adjustment
STX SRA R
1. Setting deletion (data length: max. 6-byte)
Data length
Name
List line
Fine adj. type
Number of delete line
2. In case of "Single as fine adjustment type (data length: max. 35-byte)
"
Data length
Name
List line
Fine adj. type
Target row
Target column
Fine tune X
Fine tune Y
Rotation angle *2
Laser power
adjustment *2
*1 : For the detail of the model type, refer to "Target laser marker" (P.8).
*2 : When both setting values of the rotation angle and laser power adjustment are "0", those settings can be omitted.
[List line] [Fine adj. type]
[Varies depending on the fine adj. type]
Max. 603-byte
[List line]
2-byte
Description
[byte]
2 "00"–"99"
1 "0": Setting deletion
(3) "001"–"100"
[byte]
2 "00"–"99"
1 "1": single fine adjustment
3 "001"–"100"
3 "001"–"100"
Model type*1
8
LP-V10
LP-4x0
LP-4x5/LP-V15
8
LP-4x1/LP-W
(7) "-180.00"–"+180.00" [°]
(3) "-50"–"+50" [%]
ME-LP400V-EX-6
(Check
Delimiter
sum)
If only the first line in the list line will be
deleted, the setting can be omitted.
Description
Setting range [mm]
"-045.000"–"+045.000"
"-055.000"–"+055.000"
"-080.000"–"+080.000"
"-027.500"–"+027.500"
(Check
Delimiter
sum)
Remarks
Remarks
127