Siemens SINUMERIK Series Function Manual page 675

Program code
; always, when
; then
;
;
;
;
;
WHENEVER $AC_MARKER[1]==1 DO $AA_OVR[X]=0 $AA_OVR[Z]=100
;
; When
;
; then
;
;
;
WHEN $AA_IW[Z]==$SA_OSCILL_REVERSE_POS1[Z] DO $AC_MARKER[2]=0
;
;----------------------------------
N750 OSCILL[Z]=(X) POSP[X]=(5,1,1)
; Assign axis X to the oscillation axis Z as infeed axis,
; this should infeed to end position 5
; in substeps of 1 and the sum of all sublengths
; should be exactly the same as the end position.
;
N780 WAITP(Z)
;
N790 X0 Z0
N799 M30
Description
The starting position matches reversal point 1. The WHEN .... synchronized actions (see
above) prevent an infeed when the starting position is reached.
Extended Functions
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
Comment
the marker with index 1 equals 1,
set the axial override of the feed axis
to 0 (to prevent a new premature
infeed!) and set the
axial override of the oscillation axis to 100%
(so that the previous
synchronized action is canceled!)
the current position of the oscillating axis
is equal to the reversal position 1,
reset the marker with index 2,
release the first synchronized action (no
infeed when reaching the start position
== reversal position 1)
; release the Z axis
; End of program
P5: Oscillation - only 840D sl
11.5 Examples
675