Basic Infeed Open-Loop Control - Siemens SINAMICS S120 Function Manual

Overview of important parameters (see SINAMICS S120/S150 List Manual)
● r0002 Infeed/operating display
● r0046 CO/BO: Infeed missing enable signals
● p0210 Device supply voltage
● p0840 BI: ON/OFF1
● p0844 BI: 1. OFF2
● r0898 CO/BO: Control word sequence control infeed
● r0899 CO/BO: Status word sequence control infeed
● r2138 CO/BO: Control word, faults/alarms
● r2139 CO/BO: Status word, faults/alarms 1
● p3680 BI: Inhibit Braking Module internally
1.3.2

Basic Infeed open-loop control

Description
The Basic Line Module can be controlled via the BICO interconnection by means of
terminals or the field bus. The operating status is indicated on the operating display r0002.
The missing enable signals for operation (r0002 = 00) are mapped in parameter r0046. The
EP terminals (enable pulses) must be connected in accordance with the Equipment Manual.
Acknowledge error
Errors that are still present but the causes of which have been rectified can be
acknowledged by means of a 0/1 edge at the "Acknowledge error" (p2103) signal.
Drive functions
Function Manual, (FH1), 10/2008, 6SL3097-2AB00-0BP5
Infeed
1.3 Basic Infeed
39