Figure 59 Installing The Hvps On The Baseplate; Figure 60 Installing The Baseplate On The Press - HP Indigo Division Series Instruction For Use & Installation Instructions

Figure 59 Installing the HVPS on the baseplate

1 Screws securing HPVS to baseplate
2 Baseplate
3 HVPS unit (upside down)
Use four M6 × 16 Allen screws with washers and spring washers to install the HVPS on the
1.
baseplate (Figure 59).

Figure 60 Installing the baseplate on the press

1 Baseplate
2 Screws securing baseplate to press (2 each side)
Use four M5 × 20 Allen screws with washers and spring washers to install the baseplate and
2.
HVPS on the press (Figure 57 and Figure 60).
3. Place the sponge filter on top of the HVPS.
CA294-03070 rev 00
Installation Manual
1
2
3
1
2
page 78 of 153