Procedure; Installing The Electrical Cabinets; Installing The Printing Engines - HP Indigo Division Series Instruction For Use & Installation Instructions

Procedure

NOTE:

Installing the electrical cabinets

1. Place electrical cabinet M1 and electrical cabinet M2 in their positions.
2. If any of the finishing components include electrical cabinets, position that cabinet opposite its
corresponding finishing component and in line with the main electrical cabinets.

Installing the printing engines

Positioning the printing engines
1. Position the u-bases as follows
a.
Two persons are required for this installation.
Unpack the u-bases and loosen the front two securing screws to remove the u-base
slip plates.
Place the slip plates aside for later use.
CA294-03070 rev 00
Installation Manual
page 24 of 153