Box no.
Part number
13
Q5391-00680
14
MPR-1309-11
The alignment jig
Figure 2 The alignment jig
Figure 3 The alignment jigs mounted
1
Sights increasing in height from PE1 to PE2
2
PE1 jig
3
PE2 jig
4
Highest sight
Alignment jigs are used to adjust the forward/rearward alignment of the printing engines.
The jigs are used with a surveying tool (scope). They are not identical. When mounted properly, the
sights on the jigs increase in height going from PE1 to PE2. The increase in height allows all the sites
to be visible in the surveying tool. Adjustments can then be made to the position of the printing
Contents
Kit cons. Instl. W3250
Pap. Roll condat 115
CA294-03070 rev 00
Installation Manual
Qty
Name and weight (kg)
1
Consumables kit
1
Paper roll condat 115
page 19 of 153