HP Indigo Division Series Instruction For Use & Installation Instructions page 16

Heading Step Reference
73. CATP on page 145
COI 74. Complete the
installation on page
150
Procedure
aa. Click Setup.
The Setup OD of 100% Spec
Values window opens.
bb. Enter the optical density values
noted in step l above in the
appropriate color fields.
cc. Click OK.
A warning may appear. Click OK
to close the warning.
dd. In the wizard, complete the wizard
steps.
Make sure that the color
calibration is completed
successfully.
ee. From the Diagnostics menu,
click Writing Head.
The Writing Head window opens.
ff. Click the Laser Power tab.
gg. Check that the Laser Power
values do not approach the upper
or lower limits (30 to 1).
If the values are at either
extremity, perform the Machine
LUT Calibration wizard from
Adjustments > Machine LUT
Calibration.
11. If necessary, perform the Machine
LUT using 180 lpi.
Testing during normal operation on page
145.
Perform CATP test procedure:
Printing CATP test on page 147.
Check CATP against CATP specification
checklist on page 147.
Complete installation as detailed on page
150.
CA294-03070 rev 00
Installation Manual
Notes and
check
page 16 of 153