Connect the air supply
NOTE:
Figure 88 Connection the air supply at the ILP
1
ILP front
2
Air outlet to PE connection
3
Air Input connection
4
Air outlet to unwinder
At the ILP front
1.
Connect the following air hoses at the ILP front:
a.
Input hose from mains air supply to Inlet connection.
b.
Long outlet hose from Outlet to PE connection to PE1.
c.
Long outlet hose from Outlet to UW connection to the unwinder.
All air supply hoses are to be routed appropriately under the
floor platform.
CA294-03070 rev 00
Installation Manual
page 108 of 153