Sony BRC-300 Service Manual page 21

6. Until the "Read to Install!" displayed on the window,
repeat that click [Next|>] button while checking the
contents which appeared on the window.
7. Click [Install] button.
After the installation, the message "Installation
Completed!" appears on the window.
8. Click [Finish] button.
BRC-300/300P
BRU-300/300P
Setup
1. Start the installed firmware writing program.
The warning window appears.
2. Click [OK] button on the warning window to display
the Welcome! window.
3. Check the checkbox of "Create a new workspace", and
click [OK] button.
4. Enter "Cyclone" into the text box of "Workspace
Name:", and click [OK] button.
1-9