Motion Control With Profidrive - Siemens Sinamics S120 Function Manual

Hide thumbs Also See for Sinamics S120:

Table of Contents

Communication

10.1 Communication according to PROFIdrive

Example, central probe evaluation

Assumptions for the example:

● Determination of the time stamp MT1_ZS_S by evaluating the rising edge of probe 1

● Determination of the time stamp MT2_ZS_S and MT2_ZS_F by evaluating the rising and

● Probe 1 on DI/DO 9 of the Control Unit (p0680[0] = 1)

● Probe 2 on DI/DO 10 of the Control Unit (p0680[1] = 2)

● Manufacturer-specific telegram p0922 = 391 is set.

Motion Control with PROFIdrive

The "Motion Control with PROFIBUS" or "Motion Control with PROFINET" function can be

used to implement an isochronous drive link between a master and one or more slaves via

the PROFIBUS field bus or an isochronous drive link via PROFINET.

The isochronous drive link is defined in the following documentation:

Reference: /P5/ PROFIdrive Profile Drive Technology

falling edge of probe 2

Figure 10-13 Sequence chart for central probe example

Function Manual, (FH1), 01/2012, 6SL3097-4AB00-0BP2

Drive functions

Show Quick Links

Table of Contents