Modifying The Viewport - Siemens SINUMERIK 840D sl Operating Manual

Procedure
...
...
7.8.4

Modifying the viewport

If you would like to move, enlarge or decrease the size of the segment of the graphical display,
e.g. to view details or display the complete workpiece, use the magnifying glass.
Using the magnifying glass, you can define your own section and then enlarge or reduce its
size.
Precondition
The simulation or the simultaneous recording is started.
Procedure
Universal
Operating Manual, 05/2017, A5E40868517
1. Press the "Details" softkey.
2. Press the "Rotate view" softkey.
3. Press the "Arrow right", "Arrow left", "Arrow up", "Arrow down", "Arrow
clockwise" and "Arrow counterclockwise" softkeys to change the position
of the workpiece.
- OR -
Keep the <Shift> key pressed and then turn the workpiece in
the desired direction using the appropriate cursor keys.
1. Press the "Details" softkey.
2. Press the "Magnifying glass" softkey.
A magnifying glass in the shape of a rectangular frame appears.
3. Press the "Magnify +" or <+> softkey to enlarge the frame.
- OR -
7.8 Modifying and adapting the simulation graphics
Simulating machining
185