Procedure
...
The G groups selection displayed in the "G Functions" window may differ.
References
For more information about configuring the displayed G groups, refer to the following document:
SINUMERIK Operate Commissioning Manual
6.12.2
All G functions
All G groups and their group numbers are listed in the "G Functions" window.
Within a G group, only the G function currently active in the controller is displayed.
Additional information in the footer
The following additional information is displayed in the footer:
● Actual transformations
Display
TRANSMIT
TRACYL
TRAORI
Universal
Operating Manual, 05/2017, A5E40868517
1.
Select the "Machine" operating area.
2.
Press the <JOG>, <MDA> or <AUTO> key.
3.
Press the "G functions" softkey.
The "G Functions" window is opened.
4.
Press the "G functions" softkey again to hide the window.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Meaning
Polar transformation active
Cylinder surface transformation active
Orientation transformation active
Machining the workpiece
6.12 Display G and auxiliary functions
141