Siemens SINUMERIK 840D sl Operating Manual page 317
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Note
The relevant option bit must be set to enable you to program a spline interpolation.
Procedure
Note
Selection of axes and parameters for teach-in
You can select the axes to be included in the teach-in block in the "Settings" window.
You also specify here whether motion and transition parameters are offered for teach-in.
Universal
Operating Manual, 05/2017, A5E40868517
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1.
Select the "Machine" operating area.
2.
Press the <AUTO> or <MDA> key.
3.
Press the <TEACH IN> key.
4.
Press the "Teach prog." softkey.
5.
Press the ">>" and "ASPLINE" softkeys.
The "Akima-spline" window opens with the input fields.
6.
Traverse the axes to the required position and if necessary, set the
transition type for the starting point and end point.
7.
Press the "Accept" softkey.
A new program block will be inserted at the cursor position.
- OR -
Press the "Cancel" softkey to cancel your input.
Teaching in a program
13.4 Teach-in via Windows
317
Advertisement
Table of Contents
