Reactivating The Multitool - Siemens SINUMERIK 840D sl Operating Manual

Tool management
11.14 Working with multitool
Loading a multitool into a magazine
Unloading a multitool
11.14.7

Reactivating the multitool

Multitool and tools located on the multitool can be disabled independently of one another.
If a multitool is disabled, then the tools of the multitool can no longer be changed in using a
tool change.
If only one tool on a multitool has a set monitoring function and the lifetime or the unit quantity
has expired, then the tool and the multitool on which the tool is located are disabled. The other
tools on the multitool are not disabled.
If several tools with monitoring are mounted on the multitool and the lifetime or unit quantity
has expired for one tool, then only this tool is disabled.
Reactivating
If a tool with expired lifetime or unit quantity that is mounted on a multitool is reactivated, then
for this tool, the lifetime/unit quantity is set to the setpoint and the tool and the multitool are re-
enabled (disable status is removed).
256
2. Position the cursor on the required empty magazine location.
3. Press the "Load" softkey.
The "Load with" window opens.
4. Select the required multitool.
5. Press the "OK" softkey.
2. Position the cursor on the multitool that you wish to unload from
the magazine.
3. Press the "Unload" softkey.
The multitool is removed from the magazine and is saved in the
NC memory at the end of the tool list.
Machine manufacturer
Please observe the information provided by the machine manufacturer.
Operating Manual, 05/2017, A5E40868517
Universal