D View - Siemens SINUMERIK 840D sl Operating Manual

Changing the display
You can increase or decrease the size of the simulation graphic and move it, as well as change
the segment.
See also
Enlarging or reducing the graphical representation (Page 183)
Panning a graphical representation (Page 184)
Modifying the viewport (Page 185)
7.5.3

3D view

Displaying the 3D view
Changing the display
You can increase or decrease the size of the simulation graphic, move it, turn it, or change the
segment.
Displaying and moving cutting planes
You can display and move cutting planes X, Y, and Z.
See also
Enlarging or reducing the graphical representation (Page 183)
Panning a graphical representation (Page 184)
Rotating the graphical representation (Page 184)
Modifying the viewport (Page 185)
Defining cutting planes (Page 186)
Universal
Operating Manual, 05/2017, A5E40868517
1. Simultaneous recording or the simulation is started.
2. Press the "Other views" and "3D view" softkeys.
Software option
You require the option "3D simulation (finished part)" for the simulation.
Simulating machining
7.5 Different views of the workpiece
179