Selecting A Tool - Siemens SINUMERIK 840D sl Operating Manual

Working in manual mode
5.2 Selecting a tool and spindle
Parameter Meaning
ST Sister tool number (1 - 99 for sister tool strategy)
Spindle Spindle selection, identification with spindle number
Spindle M function
Other M functions Input of machine functions
Refer to the machine manufacturer's table for the correlation between the meaning and
number of the function.
Work offset G Selection of the work offset (basic reference, G54 - 57)
You can select work offsets from the tool list of settable work offsets via the "Work offset"
softkey.
Dimension unit Selecting the measurement unit
The setting made here has an effect on the programming.
Machining plane Selection of the machining plane (G17(XY), G18 (ZX), G19 (YZ))
Gear stage Specification of the gear stage (auto, I - V)
Stop position Entering the spindle position
Note
Spindle positioning
You can use this function to position the spindle at a specific angle, e.g. during a tool change.
● A stationary spindle is positioned via the shortest possible route.
● A rotating spindle is positioned as it continues to turn in the same direction.
5.2.2

Selecting a tool

Procedure
90
Spindle off: Spindle is stopped
CCW rotation: Spindle rotates counterclockwise
CW rotation: Spindle rotates clockwise
Spindle positioning: Spindle is moved to the desired position.
1. Select the "JOG" operating mode.
2. Press the "T, S, M" softkey.
3. Enter the name or the number of the tool T in the input field.
- OR -
Unit
inch
mm
degrees
Operating Manual, 05/2017, A5E40868517
Universal