Procedure
See also
Storing any new file (Page 272)
12.4.3
Creating a new G code program
You can create G code programs and then render G code blocks for them in a directory/
workpiece.
Procedure
Universal
Operating Manual, 05/2017, A5E40868517
1.
Select the "Program manager" operating area.
2.
Select the desired storage location and position the cursor on the folder,
in which you would like to create a workpiece.
3.
Press the "New" softkey.
The "New Workpiece" window appears.
4.
If necessary, select a template if any are available.
5.
Enter the desired workpiece name and press the "OK" softkey.
The name can be a maximum of 24 characters long.
You can use any letters (except accented), digits or the underscore sym‐
bol (_).
The directory type (WPD) is set by default.
A new folder with the workpiece name will be created.
The "New G Code Program" window will open.
6.
Press the "OK" softkey again if you want to create the program.
The program will open in the editor.
1.
Select the "Program manager" operating area.
2.
Select the desired storage location and position the cursor on the folder,
in which you would like to store the program.
3.
Press the "New" softkey.
12.4 Creating a directory/program/job list/program list
Managing programs
271