Viewing I/O Addresses In The Tia Portal - Siemens SINUMERIK 840D sl Configuration Manual

5.3

Viewing I/O addresses in the TIA Portal

Requirement
● An NCU has been inserted
● The project view is active
Procedure
To display a complete overview of the assigned I/O addresses, proceed as follows:
1. Click the PLC subcomponent on the NCU.
2. Click "Properties > General" in the inspector window and then click "Address overview" in
the sector tree.
Result
The Address overview is displayed:
Figure 5-1 Address overview in the "Properties" inspector window of the PLC
SINUMERIK STEP 7 Toolbox V14 SP1
Configuration Manual, 05/2017, A5E41846325
Configuring telegrams and drive units
5.3 Viewing I/O addresses in the TIA Portal
105