Siemens HiPath 1100 Service Manual page 304

Configuring the system specifically for the client
Comments about the System's Programming Codes
Symmetric/Asymmetric Call (074)
This setting configures the system for symmetric or asymmetric calls.
Check with your local carrier to know which operating mode should be configured for your
system.
No ACK Setup for S Line (075)
0
Check with your local carrier to know which operating mode should be configured for your
system.
Notify (076)
Check with your local carrier to know which operating mode should be configured for your
system.
Automatic Keypad (077)
Your local carrier can inform you which ISDN features can be controlled by code in your country.
This feature allows you to activate the appropriate ISDN function at the terminal, without the
need for external access.
Assigning a Digital Line to a MSN (078)
This features allows you to assign the MSNs provided by your local carrier to calls made over
digital lines.
External Line Prefix (189)
This setting specifies the prefix for the PABX external lines, for domestic and international calls.
By default, the type of a programmed called is not specified.
External Number Registration (191)
To use the Attendant feature each external number must be registered to a specific slot.
If the prefix (Code 089) for these numbers has already been configured, only the final digits
need to be registered.
By default, no digits are specified.
A31003-K1160-S100-03-7620
7-66
Service Manual