Driver Installation; Hipath 1100 Usb Drivers; Installation Setup - Siemens HiPath 1100 Service Manual

6.3

Driver Installation

6.3.1

HiPath 1100 USB Drivers

Two types of USB drivers can be installed for the HiPath 1100 system: Administration USB
driver or Administration + CAPI Interface USB driver.
If all you need is administration of the HiPath 1100 system, HiPath 1100install the
Administration USB drivers package. If you wish to use CAPI services, in addition to performing
HiPath 1100 system administration, you will need to install the Administration + CAPI Interface
drivers.
Administrator access is required for performing the installation under Windows
2000/XP .
If other PABX drivers or an ISDN card are already installed on the system, they must
be completely uninstalled before installing any other driver.
Procedure:
6.3.1.1

Installation Setup

1. Make sure the HiPath 1100 system is turned on (do not connect the USB cable at this point;
this should be done during driver installation)
2. Insert the HiPath 1100 CD in the CD drive
A31003-K1160-S100-03-7620
Service Manual
Operation
Driver Installation
6-18