Siemens HiPath 1100 Service Manual page 293

Door Lock (116)
This feature detects when there is a locking device installed.
DIDs for Entrance Telephones (159)
Specifies the extensions that will be called when the Entrance Telephone is activated.
The default setting is extension 11/101.
Permissions for the Door Opener (125)
Specifies the extensions that will be able to use the electric Door Opener.
This class of service is assigned to all extensions by default.
7.2.10 Call Detail Report Manager
Information about calls received and made are stored in the system's memory. CDR records
can be reviewed in the following manner:
By using a PC or printer connected through a serial interface.
●
To issue a ticket list, a ticketing application such as CallReport must be installed on the PC.
By using a PC connected on a local network. The ticket list can be viewed using Windows
●
HyperTerminal. Configure the settings by following these steps:
Configure the CommSever for ADSL connection.
●
Select the "Serial Printing" checkbox on the HiPath 1100 Manager, under Advanced -
●
> System Settings
On the HyperTerminal select TCP/IP Mode and enter the configuration number for an
●
ADSL module (the default is 10.0.0.1) and the port (9366);
Do not use a Serial or ADSL connection type while using HyperTerminal. During
●
ticketing the administration can be performed via USB connection, optiPoint, ISDN or
analog modem.
Tickets will only be shown after the end of the first connection.
●
For establishing a serial or ADSL connection to the HiPath 1100 Manager disconnect
●
HyperTerminal.
It is recommended that you uncheck the "Serial Printing" checkbox on the HiPath
1100 Manager if tickets are not being issued over an ADSL connection.
A31003-K1160-S100-03-7620
Service Manual
Configuring the system specifically for the client
Comments about the System's Programming Codes
7-55