On The Hipath 1190/1190R; Figure 4-37 Illustration Of Usb Cable Connection On Hipath 1190 - Siemens HiPath 1100 Service Manual

4.10.2

On the HiPath 1190/1190R

Figure 4-37 Illustration of USB cable connection on HiPath 1190
Connections
Step
1. Plug the USB adapter cable (with the male Mini DIN connector) into the 4-pin Mini
DIN connector on the motherboard (Figure 4-37).
2. Connect the A to B Standard end of the USB cable to the USB adapter, and connect
the other end to the computer or modem.
3. See System Programming Mode in the "Programming the system using a PC" on
page 6-3.
A31003-K1160-S100-03-7620
Service Manual
Procedure
Installation
Installing an USB Interface
4-49